TITANIC MK III SUBWOOFER - 4 OHM - 12"

DAYTON REFERENCE HF SUBWOOFER - 4 OHM - 8" The Dayton Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Specifications: *Power handling: 280 watts RMS/500 watts max *VCdia: 2" *Le: .84 mH *Impedance: 4 ohms *Re: 3.3 ohms *Frequency range: 27 - 1,000 Hz *Fs: 27 Hz *Magnet weight: 50 oz. *SPL: 86 dB 2.83 V/1m *Vas: 1.22 cu. ft. *Qms: 2.86 *Qes: .47 *Qts: .40 *Xmax: 9mm *Dimensions: A: 8-1/2", B: 7-1/4", C: 4-3/4". Extensively vented motor eliminates compression and allows quiet excursion Lightweight black anodized aluminum cone for rigidity and lower moving mass Suitable for sealed or vented enclosures Triple shorting ring motor for ultra-low distortion 2-layer coil for reduced back EMF Highest quality materials throughout for long-lasting performance

DAYTON REFERENCE HF SUBWOOFER - 4 OHM - 10" The Dayton Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high output version for automotive applications or for equalized high-power home subwoofers.
Specifications: *Power handling: 600 watts RMS/1000 watts max *VCdia: 2-1/2" *Le: 1.75 mH *Impedance: 4 ohms *Re: 3.4 ohms *Frequency range: 24 - 600 Hz *Fs: 24 Hz *Magnet weight: 100 oz. *SPL: 87 dB 2.83 V/1m *Vas: 1.20 cu. ft. *Qms: 4.20 *Qes: .36 *Qts: .33 *Xmax: 12mm *Dimensions: A: 10-1/2", B: 9-1/4", C: 5". Extensively vented motor eliminates compression and allows quiet excursion Extra-thick black anodized aluminum cone for maximum rigidity Triple shorting ring motor for ultra-low distortion 4-layer coil for high power handling Optimized parameters for small enclosures Highest quality materials throughout for long-lasting performance

REFERENCE HF SUBWOOFER - 4 OHM - 12"

REFERENCE HF SUBWOOFER - 4 OHM - 15"

18" Reference HO Subwoofer

Dayton Audio TS320D-4 12" Titanic Mk 4 Subwoofer 4 Ohm

DAYTON LAUTSPRECHER DVC SUBWOOFER - 8 OHM - 12"

Dayton Audio UM18-22 18" Ultimax Subwoofer Quick Overview Dayton Audio¿s Ultimax Series DVC subwoofers are purpose-built to move tons of air and create clean, articulate, fast bass. Experience the apex of subwoofer design! Product Highlights - 18 design for enormous air movement - Over 2 of total cone travel! - 1000 watts RMS power handling - Dual mirror-imaged linear spiders ensure distortion-free excursion - Dual 2 ohm, 2-layer copper voice coils - Large vented pole piece and under-spider venting

DAYTON REFERENCE HO SUBWOOFER - 4 OHM - 15"

Quick Overview The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.

Product Highlights

- Extensively vented motor eliminates compression and allows quiet excursion
- Lightweight black anodized aluminum cone for rigidity and lower moving mass
- Triple shorting ring motor for ultra-low distortion
- 2-layer coil for reduced back EMF
- Suitable for sealed or vented enclosures
- Highest quality materials throughout for long-lasting performance

Merkmale

Typ Subwoofer
Korbmaß (Zoll) 15
Imp. (Zn/ohm) 4
Freq.(Hz) 21-600
Music (W) 1600
Nominal (W) 800
SPL (1W/1M) 87,00
VC (d) 64 Xmax +- (mm) 12,00
Re (Ohm) 3,30
LE (VC/mH) 1,8300
BL (NA) (F/I) 21,52
fs 24,2
Mms(g) 380,
Cms (mm/N) ,11
Sd (cm2) 829,
VAS 109,70
QMS 4,48
QES ,42
QTS ,39
Membranmaterial Aluminium
Außendurchmesser (mm) 388,40
Einbaulochmaß (mm) 355,80
Einbautiefe (mm) 178,00
Hersteller / Marke Dayton