The AS2.100 is a plate amp for use in powered speaker systems. Being an active speaker controller, the AS2.100 forms the basis of, for instance, a powerful active two-way monitor. In stereo mode one AS2.100 will power an active master / passive slave pair.





Specifications

GENERAL FEATURES:

- Fully controlled by PC software (included)
- Cross-over settings fully customisable (real-time)
- UcD100OEM (2x) powered
- Stereo analogue input
- Infrared remote control (optional)
- Automatic input scanning
- compact design
- Fully user customised filtering
- Button panel controlled
- Remote controlled
- Link connection master / slave (only with two modules)
- Low signal to noice (-100dB)


APPLICATIONS:

When one module is used:

- Stereo passive filtered system
- Bridged mode for single subwoofer (max 140Watt @ 4 Ohms)
- Mono/mid 2-way setup (tweeter + sub)


When two modules are used:

- 2-way active filtered stereo system
- 2 channel system with active subwoofer
- 2 channel system, both modules in bridge mode for more power


All setups are possible with analogue and optional with the digital audio inputs SPDIF and USB.


OPTIONAL FEATURES (with optional digital add-on board):

- S/PDIF input and output
- Sampling rates up to 192kHz
- USB Audio


TECHNICAL DATA:

Supply voltage: 230Volt AC/50Hz +/-10%
Output power LS1: 100W @ 4Ohms
Output power LS2: 100W @ 4Ohms



MECHANICAL DATA:

Dimentions: 115mm x 200mm x 60mm (W x H x D)
Weight: 1.6Kg

The AS2.100 is a plate amp for use in powered speaker systems. Being an active speaker controller, the AS2.100 forms the basis of, for instance, a powerful active two-way monitor. In stereo mode one AS2.100 will power an active master / passive slave pair. The AS2.100 Digital is a AS2.100 including the optional digital add-on board.



Specifications


GENERAL FEATURES:

- Fully controlled by PC software (included)
- Cross-over settings fully customisable (real-time)
- UcD100OEM (2x) powered
- Stereo analogue input
- S/PDIF input and output
- Sampling rates up to 192kHz
- USB Audio
- Infrared remote control (optional)
- Automatic input scanning
- compact design
- Fully user customised filtering
- Button panel controlled
- Remote controlled
- Link connection master / slave (only with two modules)
- Low signal to noice (-100dB)



APPLICATIONS:


When one module is used:

- Stereo passive filtered system
- Bridged mode for single subwoofer (max 140Watt @ 4 Ohms)
- Mono/mid 2-way setup (tweeter + sub)



When two modules are used:

- 2-way active filtered stereo system
- 2 channel system with active subwoofer
- 2 channel system, both modules in bridge mode for more power


All setups are possible with analogue and the digital audio inputs SPDIF and USB.

TECHNICAL DATA:


Supply voltage: 230Volt AC/50Hz +/-10%
Output power LS1: 100W @ 4Ohms
Output power LS2: 100W @ 4Ohms


MECHANICAL DATA:

Dimentions: 115mm x 200mm x 60mm (W x H x D)
Weight: 1.6Kg

Völlig neuartiges Digital - Verstärker Modul mit UcD Digitaltechnik von Hypex 120Watt / 4 Ohm

Das DS 1.2 ist das erste einer neuen Subwoofer Verstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einen sehr niedrigen Ausgangswiderstand, welche für eine noch bessere Kontrolle des Subwoofers garantiert. Seine 120 Watt @ 4 Ohm liegen ohne großen Kühlaufwand Dank dieser Digitaltechnik an den Ausgängen dieses nur 17 cm mal 19 cm messenden Moduls an. Empfohlen wird eine eigene Kammer zum Einbau des Moduls



Technische Daten

Ausgangsleistung: 120 W @ 4 Ohm / 75 W @ 8 Ohm
Subsonic Filter (24 dB/Okt.): 20 Hz/-3 dB
Trennfrequenz: 50 Hz - 150 Hz 12 dB
Bassboost Frequenz: 25 Hz
Bassboost Level: 6 dB
Bassboost Bereich: 20 Hz - 50 Hz
Dämpfungsfaktor: >600
Eingangsimpedanz: 10 kOhm
Engansanschluss: Cinch Mono
Merkmale: Class D UcD design
Kurzschlussschutz
Abmessungen: 170 mm x 190 mm x 60 mm
Gewicht: 2,0 kg


120 Watt Class D amplifier mounted on frame for use with active Subwoofer. Controls and in-output sockets on heavy-duty panel. Crossover filter 12dB/octave Additional subsonic filter20Hz, 24dB/octave

Das DS 2.0 ist das zweite einer neuen Subwoofer Verstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einen sehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle des Subwoofers garantiert.
Seine 175 Watt @ 4 Ohm oder 100 Watt @ 8 Ohm, liegen ohne großen Kühlaufwand Dank der neuen Digitaltechnik an den Ausgängen dieses nur 19 cm mal 22 cm messenden Moduls an.
Seine Einbautiefe beträgt nur 6 cm.

Technische Daten

Ausgangsleistung: 175 W @ 4 Ohm / 100 W @ 8 Ohm
Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB
Trennfrequenz: 30 Hz - 120 Hz 12 dB
Bassboost Frequenz: 50 Hz - 120 Hz
Bassboost Level: 6 dB
Dämpfungsfaktor: >500
Eingangsimpedanz: 10 kOhm
Eingangsimpedanz high-level: 1 kOhm
Engansanschluss: Cinch Stereo
Merkmale: Class D UcD design
Kurzschlussschutz
Abmessungen: 190 mm x 220 mm x 60 mm
Gewicht: 2,0 kg

Das DS 4.0 ist das dritte einer neuen Subwoofer Verstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einen sehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle des Subwoofers garantiert.
Seine 400 Watt @ 4 Ohm oder 200 Watt @ 8 Ohm, liegen ohne großen Kühlaufwand Dank der neuen Digitaltechnik an den Ausgängen dieses nur 264 mm mal 267 mm messenden Moduls an.
Seine Einbautiefe beträgt nur 6 cm.

Technische Daten

Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm
Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB
Trennfrequenz: 30 Hz - 120 Hz 12 dB
Bassboost Frequenz: 20 Hz - 50 Hz
Bassboost Level: 0 - +6 dB
Dämpfungsfaktor: >1000
Eingangsimpedanz: 10 kOhm
Eingangsimpedanz high-level: 1 kOhm
Engansanschluss: Cinch Stereo, 5.1 Schraub / Banane Stereo
Merkmale: Class D UcD design
Kurzschlussschutz
Abmessungen: 267 mm x 267 mm x 70 mm
Gewicht: 2,0 kg

800Watt Class D subwoofer plate amplifier with active filtering.

Specifications

GENERAL FEATURES:

- High efficiency Class D design
- Active subwoofer amplifier

TECHNICAL DATA:

Continuous output power (8 Ohm): 530 Watts (+0, -0.5dB)
Continuous output power (4 Ohm): 800 Watts (+0, -0.5dB)
Subsonnic-filter: 12Hz / -3dB, 24dB/Octave
Phase: 0° - 180°, 180° - 360°
Crossover frequency subwoofer: 50Hz - 150Hz, 18dB/Octave
Bassboost: 20Hz - 50Hz
Bossboost level: 0dB - +6dB
Damping factor: 1000
Protection: Output shortcut / DC-error
Crossover filtering: Linkwitz-Riley, 24dB/Octave
Input impedance RCA: 10kOhm
Input impedance XLR: 10kOhm


MECHANICAL DATA:
Dimentions: 267mm x 267mm x 70mm (W x H x D)
Weight: 5.75Kg

The PSC2.400d is a plate amp for use in powered speaker systems with analog and digital input. By it's four presets option, Powercon connection and balanced audio input it is a great product for universal use in professional audio but for home users as well. The DSP gives you the possibility to use it for any kind of system, for example a 2 way active loudspeaker or a bridged subwoofer amplifier.


Specifications

GENERAL FEATURES:


-2x UcD400OEM plate amplifier
-Powered by SMPS400
-Four programmable presets
-Balanced audio input
-Balanced audio through loop
-Powercon power connection
-Two channel active filtering
-Fully user-configurable DSP filters
-Firmware update by USB -Digital version with AES/EBU input


APPLICATIONS:

This module can be used for the following setups:

- Active 2-channel system
- Active power sub-woofer
And with 2 modules it is also possible to set up a 3-channel system with one module for the separate Subwoofer, and a second module for the top in a 2-channel system.
All setups are possible with analogue and digital audio inputs AES/EBU.

Also available:
Analog only version, PSC2.400

TECHNICAL DATA:

Supply voltage: 180-264Volt AC/50Hz (switch able to 90-132Volt 60Hz)
Output power LS1: 400W @ 4Ohms
Output power LS2: 400W @ 4Ohms

MECHANICAL DATA:

Dimensions: 142mm x 330mm x 55mm (W x H x D)
Weight: 1.1Kg

The PSC2.400 is a plate amp for use in powered speaker systems. Its Digital Signal Processor is fully configurable to suit applications as diverse as 2-way monitor speakers and powered subs. Four programmable presets, Powercon inlet and balanced audio inputs make it the ideal workhorse for professional or high-end domestic speakers.



Specifications

GENERAL FEATURES:

-Two 400W UcD amplifiers
-Powered by SMPS400
-Four programmable presets
-Balanced audio input
-Balanced audio through loop
-Powercon power connection
-Two channel active filtering
-Fully user-configurable DSP filters
-Firmware update by USB

APPLICATIONS:

This module can be used for the following setups:

- Active 2-way speaker
- Powered stereo system
- Active powered sub-woofer

All setups are possible with analogue and optional with the digital audio inputs AES/EBU.

OPTIONAL FEATURES:
- AES/EBU input and output

TECHNICAL DATA:

Supply voltage: 180-264Volt AC/50Hz (switchable to 90-132Volt 60Hz)
Output power: 400W @ 4Ohms per channel or total.

MECHANICAL DATA:


Dimensions: 142mm x 330mm x 55mm (W x H x D)
Weight: 1.1Kg

Digitales Verstärkermodul
Das UcD 180 ist ein Vollbereichs-Digital-Endstufenmodul in sehr leichter Bauweise. Das Modul verfugt uber einen Remote Eingang zur automatischen Aktivierung. Seine Einsatzbereiche erstrecken sich uber z.B.: aktive Monitore, High End Mehrweg-Aktivlautsprecher, kleinere PASysteme, aktive Subwoofer und sonstige DIY Projekte. Einen grosen Bruder stellt das UcD 400 mit 400 Watt Ausgangsleistung !


Technische Daten:

Ausgangsleistung: 180 W @ 4 Ohm / 105 W @ 8 Ohm (mit +/-50V)
Klirrfaktor: 0.01% Bandbreite: 10Hz Eingangs impedanz: 100k.
Ausgangs impedanz: 0.01.
Stand-by mode (stand-by power <3W)
Differential input, AC-coupled
Kurzschlus Schutz
Efficiency >90%.
Abmessungen: 65mm x 65mm x 31mm.
Gewicht: 95g.
Erforderliche Betriebsspannung: +20V/-20V bis +50V/-50V

Digitales Verstärkermodul

Digitales Verstärkermodul
UcD180HG with premounted Audiophile HxR regulators

Digitales Verstärkermodul
Das UcD 400 ist ein Vollbereichs-Digital-Endstufenmodul in sehr leichter Bauweise Und einer leistung von 400 Watt. Das Modul verfugt uber einen Remote Eingang zur automatischen Aktivierung. Seine Einsatzbereiche erstrecken sich uber z.B.: aktive Monitore, High End Mehrweg-Aktivlautsprecher, kleinere PA-Systeme, aktive Subwoofer und sonstige DIY Projekte. Einen kleinen Bruder stellt das UcD 180 mit 180 Watt Ausgangsleistung !


Technische Daten


Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm (mit +/-60V)
Klirrfaktor: 0.015% Bandbreite: 10Hz Eingangs impedanz: 10k.
Stand-by mode (stand-by power <3W)
Differential input
Kurzschlus Schutz
Uberspannungsschutz
Efficiency >90%.
Abmessungen: 82mm x 75mm x 31mm.
Gewicht: 150g.
Erforderliche Betriebsspannung: +20V/-20V bis +60V/-60V

Digitales Verstärkermodul

Digitales Verstärkermodul
UcD180HG with premounted Audiophile HxR regulators

700Wrms amplifier-module based on UCD-technology. Input op amp LM4562

UcD700HG with premounted high performance HxR-regulators.


APPLICATIONS:

- Audiophile power amplifiers for professional and consumer use


HIGHLIGHTS:

- Flat, fully load-independent frequency responce
- Low output inpedance
- Very low, frequency-independent THD
- Very low noise
- Fully passive loop control
- Consistent top performer in listening trails


GENERAL FEATURES:

- Runs on unregulated +/- rails
- Pop-free start and stop control
- Differential audio input
- Overcurrent and overvoltage protection
- HxR mounted


ELECTRICAL FEATURES:

- Power supply voltage: +/- 75-95V
- Driver supply voltage: +12-15V
- Unit shuts down when either rail exceeds 96V
- Output current limits at 28A
- Output power: 700Wrms @ 4Ohm


MECHANICAL FEATURES:

- Weight: 280g
- Dimentions: 130mm x 80mm x 40mm
- Mounting set included